Soft Wash A House

Soft washing is a low-pressure cleaning method that is commonly used for cleaning the exterior of houses, as it is a safe and effective way to remove dirt, grime, and other contaminants without causing damage to the surface being cleaned. Here are the basic steps involved in soft washing a house:

1. Inspect the surface: Before starting the soft washing process, it’s important to inspect the surface to be cleaned for any damage or areas that may require special attention.
2. Protect the surrounding area: Soft washing involves the use of cleaning solutions, which can be harmful to plants, pets, and people. Therefore, it’s important to protect the surrounding area with tarps or other materials to prevent any damage or harm.
3. Apply cleaning solution: Mix the cleaning solution according to the manufacturer’s instructions and apply it to the surface being cleaned using a soft wash spray nozzle or a soft wash proportioner. The cleaning solution should be applied at a low pressure to prevent damage to the surface.
4. Allow the solution to work: Allow the cleaning solution to sit on the surface for the amount of time recommended by the manufacturer, usually around 10 to 15 minutes. This allows the solution to penetrate and break down the dirt and grime on the surface.
5. Rinse the surface: After the cleaning solution has had time to work, rinse the surface thoroughly using a low-pressure spray nozzle. This helps to remove the cleaning solution and any dirt or grime that has been loosened.
6. Repeat as needed: Depending on the level of dirt and grime, it may be necessary to repeat the soft washing process to achieve the desired results.

Overall, soft washing a house requires the use of proper equipment, cleaning solutions, and techniques to ensure that the surface is cleaned thoroughly and safely. It’s important to follow the manufacturer’s instructions for any cleaning solutions used, as well as to take proper precautions to protect the surrounding area and people from harm.