1. Clear the area: Remove any furniture, toys, or other items from the deck or area around the fence.
2. Sweep the deck or fence: Use a broom to sweep away any loose debris such as leaves, twigs, or dirt.
3. Pre-rinse: Rinse the deck or fence with a garden hose to remove any loose dirt or grime.
4. Apply cleaner: Apply a deck or fence cleaner to the surface using a pump sprayer or a garden sprayer. Allow the cleaner to sit on the surface for the amount of time specified on the product label.
5. Scrub the surface: Use a stiff-bristled brush or a pressure washer with a low-pressure setting to scrub the surface and remove any dirt, grime, or stains. If using a pressure washer, use a fan tip nozzle and keep the nozzle at least 12 inches away from the surface to prevent damage.
6. Rinse thoroughly: Rinse the surface with a garden hose or a pressure washer on a low-pressure setting to remove any remaining cleaner and debris.
7. Allow to dry: Allow the deck or fence to dry completely before applying any sealer, stain, or paint.

It’s important to follow the manufacturer’s instructions for any cleaning product or equipment used, and to take appropriate safety precautions such as wearing eye protection and gloves. Additionally, it’s a good idea to test any cleaning product on a small, inconspicuous area first to make sure it doesn’t cause any damage to the wood.

The post Wood Cleaning/Restoration appeared first on For Washers, By Washers.

1. Set up the water fed pole: Assemble the water fed pole and attach it to a water source, such as a garden hose or a water tank on a truck. The pole will typically have a brush on the end, which can be used to scrub the window.
2. Wet the window: Turn on the water and use the brush to wet the window thoroughly. The brush can be used to scrub away dirt and grime.
3. Rinse the window: Once the window is scrubbed, rinse it with the water fed pole to remove any remaining dirt and cleaning solution.
4. Dry the window: After rinsing, turn off the water and use the water fed pole to remove excess water from the window. This will leave the window damp but not soaking wet. Allow the window to air dry or use a squeegee to remove any remaining water.

The water fed pole technique is useful for cleaning windows that are difficult to reach, such as windows on upper floors or windows that are situated over a sloped or uneven surface. It also allows for a more efficient and faster cleaning process, as multiple windows can be cleaned in succession without needing to move a ladder or reposition the equipment.

The post Window Clean: Water Fed Pole appeared first on For Washers, By Washers.

1. Prepare the solution: Mix a small amount of a cleaning solution with warm water in a bucket. You can use a variety of solutions, including dish soap, vinegar, or window cleaning solution.
2. Dip the squeegee in the solution: Dip the squeegee in the cleaning solution and wipe it across the top of the window to wet the surface.
3. Use the squeegee to remove the solution: Starting at the top left corner of the window, pull the squeegee down in a straight line to the bottom of the window. Wipe the blade of the squeegee with a lint-free cloth after each stroke to remove any excess water or dirt.
4. Dry the window: Use a lint-free cloth to wipe any remaining water or cleaning solution from the edges of the window and the windowsill.
5. Move on to the next window: Repeat the process on the next window until all windows have been cleaned.

It’s important to use a clean squeegee and cloth for each window to avoid transferring dirt or streaks to other windows. Additionally, it’s important to choose the right cleaning solution and to avoid using abrasive materials that can scratch or damage the surface of the window.

The post Window Clean: Traditional appeared first on For Washers, By Washers.

1. Prepare the surface: Remove any debris, loose dirt, or other materials from the surface of the concrete.
2. Apply detergent: Apply a detergent solution to the surface of the concrete using a pressure washer. Use a low-pressure setting to prevent damage to the surface.
3. Allow the detergent to work: Allow the detergent to sit on the surface of the concrete for the amount of time recommended by the manufacturer, usually around 10 to 15 minutes. This allows the solution to penetrate and break down the dirt and grime on the surface.
4. Scrub the surface: After the detergent has had time to work, scrub the surface of the concrete using a stiff-bristled brush or broom. This helps to loosen and remove any dirt or grime that has been loosened by the detergent.
5. Pressure wash the surface: After scrubbing the surface, pressure wash the concrete thoroughly using a high-pressure spray nozzle. Use a fan spray pattern, which is less likely to damage the surface than a pinpoint spray.
6. Rinse the surface: After pressure washing the surface, rinse the concrete thoroughly using a low-pressure spray nozzle. This helps to remove any remaining detergent and dirt.
7. Repeat as needed: Depending on the level of dirt and grime, it may be necessary to repeat the pressure washing process to achieve the desired results.

It’s important to use the appropriate pressure settings and nozzles for the surface being cleaned, as well as to take proper precautions to protect the surrounding area and people from harm. Additionally, it’s important to avoid using high-pressure settings on delicate surfaces, as these can cause damage to the surface and lead to costly repairs.

The post Pressure Wash Concrete appeared first on For Washers, By Washers.

Here are the basic steps involved in soft washing concrete:

1. Prepare the surface: Remove any debris, loose dirt, or other materials from the surface of the concrete.
2. Apply cleaning solution: Mix a cleaning solution according to the manufacturer’s instructions and apply it to the concrete using a soft wash spray nozzle or a soft wash proportioner. The cleaning solution should be applied at a low pressure to prevent damage to the surface.
3. Allow the solution to work: Allow the cleaning solution to sit on the concrete for the amount of time recommended by the manufacturer, usually around 10 to 15 minutes. This allows the solution to penetrate and break down the dirt and grime on the surface.
4. Agitate the surface: After the cleaning solution has had time to work, agitate the surface of the concrete using a soft-bristled brush or broom. This helps to loosen and remove any dirt or grime that has been loosened by the cleaning solution.
5. Rinse the surface: After agitating the surface, rinse the concrete thoroughly using a low-pressure spray nozzle. This helps to remove the cleaning solution and any dirt or grime that has been loosened.
6. Repeat as needed: Depending on the level of dirt and grime, it may be necessary to repeat the soft washing process to achieve the desired results.

It’s important to follow the manufacturer’s instructions for any cleaning solutions used, as well as to take proper precautions to protect the surrounding area and people from harm. Additionally, it’s important to avoid using high-pressure washing techniques, as these can cause damage to the surface of the concrete and lead to costly repairs.

The post Soft Wash Concrete appeared first on For Washers, By Washers.

1. Inspect the roof: Before starting the soft washing process, it’s important to inspect the roof for any damage or areas that may require special attention.
2. Protect the surrounding area: Soft washing involves the use of cleaning solutions, which can be harmful to plants, pets, and people. Therefore, it’s important to protect the surrounding area with tarps or other materials to prevent any damage or harm.
3. Apply cleaning solution: Mix the cleaning solution according to the manufacturer’s instructions and apply it to the roof using a soft wash spray nozzle or a soft wash proportioner. The cleaning solution should be applied at a low pressure to prevent damage to the roof.
4. Allow the solution to work: Allow the cleaning solution to sit on the roof for the amount of time recommended by the manufacturer, usually around 10 to 15 minutes. This allows the solution to penetrate and break down the dirt and grime on the surface.
5. Rinse the roof: After the cleaning solution has had time to work, rinse the roof thoroughly using a low-pressure spray nozzle. This helps to remove the cleaning solution and any dirt or grime that has been loosened.
6. Repeat as needed: Depending on the level of dirt and grime, it may be necessary to repeat the soft washing process to achieve the desired results.

Overall, soft washing a roof requires the use of proper equipment, cleaning solutions, and techniques to ensure that the roof is cleaned thoroughly and safely. It’s important to follow the manufacturer’s instructions for any cleaning solutions used, as well as to take proper precautions to protect the surrounding area and people from harm. Additionally, it’s important to avoid using high-pressure washing techniques, as these can cause damage to the roof and lead to costly repairs.

The post Soft Wash A Roof appeared first on For Washers, By Washers.

1. Inspect the surface: Before starting the soft washing process, it’s important to inspect the surface to be cleaned for any damage or areas that may require special attention.
2. Protect the surrounding area: Soft washing involves the use of cleaning solutions, which can be harmful to plants, pets, and people. Therefore, it’s important to protect the surrounding area with tarps or other materials to prevent any damage or harm.
3. Apply cleaning solution: Mix the cleaning solution according to the manufacturer’s instructions and apply it to the surface being cleaned using a soft wash spray nozzle or a soft wash proportioner. The cleaning solution should be applied at a low pressure to prevent damage to the surface.
4. Allow the solution to work: Allow the cleaning solution to sit on the surface for the amount of time recommended by the manufacturer, usually around 10 to 15 minutes. This allows the solution to penetrate and break down the dirt and grime on the surface.
5. Rinse the surface: After the cleaning solution has had time to work, rinse the surface thoroughly using a low-pressure spray nozzle. This helps to remove the cleaning solution and any dirt or grime that has been loosened.
6. Repeat as needed: Depending on the level of dirt and grime, it may be necessary to repeat the soft washing process to achieve the desired results.

Overall, soft washing a house requires the use of proper equipment, cleaning solutions, and techniques to ensure that the surface is cleaned thoroughly and safely. It’s important to follow the manufacturer’s instructions for any cleaning solutions used, as well as to take proper precautions to protect the surrounding area and people from harm.

The post Soft Wash A House appeared first on For Washers, By Washers.