In exterior cleaning, efflorescence can be removed through a process called acid washing, which involves using a diluted acid solution to dissolve the salts and then rinsing the surface clean. It is important to note that acid washing should only be done by trained professionals, as it can be dangerous if not done properly. Additionally, it is important to identify the root cause of the efflorescence, such as water intrusion, and address that issue to prevent the efflorescence from returning in the future.

The post Efflorescence appeared first on For Washers, By Washers.

Oil stains can be cleaned with a degreaser and pressure washing. It’s important to use an environmentally-friendly degreaser that won’t harm surrounding plants or animals. For tire marks, a pressure washer with a surface cleaner attachment can be used to remove the staining.

Rust stains can be challenging to remove and may require the use of a specialized rust remover. A popular method is to use a product called F9 BARC, which is specifically designed to remove rust stains from various surfaces.

Hard water spots can be cleaned using a specialized cleaner that is formulated to dissolve the minerals causing the staining. It’s important to rinse the area thoroughly after cleaning to prevent any streaking.

It’s essential to use the appropriate cleaning method for each type of non-organic material, as some surfaces may be more sensitive to certain chemicals or cleaning techniques. When in doubt, it’s always best to consult with a professional.

The post Non-Organics appeared first on For Washers, By Washers.

Organic growth or buildup can also occur on gutters, leading to blockages and potential water damage to the property. Regular exterior cleaning, such as soft washing, pressure washing, and gutter cleaning, can remove the buildup of organic material and prevent further damage to the property.

Types in exterior cleaning, there are several types of organic growth that can occur, including:

1. Algae: Algae is a common form of organic growth that is often found on roofs, decks, and siding. It is usually green or black and can be removed with the proper cleaning solutions and techniques.
2. Mold: Mold is a type of fungus that thrives in moist environments. It is often found on roofs, siding, and concrete surfaces. It can be removed with the use of a pressure washer or soft washing system, along with the proper cleaning solutions.
3. Mildew: Mildew is a form of fungus that is often found on outdoor surfaces such as decks, siding, and concrete. It is typically white or gray in color and can be removed with the use of a pressure washer or soft washing system, along with the proper cleaning solutions.
4. Lichen: Lichen is a type of growth that is a combination of algae and fungus. It is often found on roofs and other outdoor surfaces and can be removed with the use of a pressure washer or soft washing system, along with the proper cleaning solutions.

To clean these types of organic growth, it is important to first identify the type of growth that is present. Once identified, the appropriate cleaning solution and method can be determined. For example, pressure washing may be appropriate for some surfaces, while others may require a soft washing approach to prevent damage. It is important to use the appropriate safety equipment and follow recommended procedures when cleaning organic growth to ensure the best results and minimize any potential risks.

The post Organic Growth appeared first on For Washers, By Washers.

1. Personal Protective Equipment (PPE): This includes items like hard hats, safety glasses, gloves, and respiratory protection. PPE should be used to protect workers from hazards such as falls, chemical exposure, and flying debris.
2. Fall protection: Fall protection equipment such as safety harnesses and anchor points should be used when working at heights, such as on roofs or ladders.
3. Chemical safety: Exterior cleaning companies should use appropriate chemicals for the job and follow all safety precautions, including wearing PPE and properly storing and labeling chemicals.
4. Training: All workers should receive training on safety procedures, equipment operation, and chemical handling. This should include both initial and ongoing training.
5. Equipment maintenance: Equipment should be properly maintained to ensure it is functioning safely and correctly.
6. Emergency procedures: Exterior cleaning companies should have emergency procedures in place for incidents such as chemical spills or worker injuries.
7. Local regulations: Exterior cleaning companies should be aware of any local regulations or requirements related to safety equipment and procedures.

It’s important to prioritize safety in all aspects of exterior cleaning, from equipment selection to training and procedures. By doing so, you can help ensure the safety of your workers and minimize the risk of accidents or injuries.

The post Safety / PPE appeared first on For Washers, By Washers.

1. Assess the job site: Before you begin setting up, you should assess the job site to identify potential hazards, obstacles, and areas that may require special attention. Make sure you have a clear understanding of the scope of the job, the type of surfaces to be cleaned, and any special requirements or customer preferences.
2. Gather equipment and supplies: Once you have assessed the job site, you can begin gathering the necessary equipment and supplies for the job. This may include a soft wash system, hoses, pumps, nozzles, proportioners, and chemical mixtures. Make sure your equipment is in good working order and that you have enough chemical solutions and cleaning agents for the job.
3. Set up the soft wash system: The soft wash system is the heart of the soft washing process, so you need to set it up correctly. This may involve connecting hoses, pumps, and proportioners, and making sure that all the components are working properly. Follow the manufacturer’s instructions and make sure that the soft wash system is set up safely and securely.
4. Prepare the surfaces to be cleaned: Before you begin cleaning, you need to prepare the surfaces to be cleaned by removing debris, furniture, or any other objects that may get in the way. You may also need to pre-treat certain areas with chemical solutions or apply a detergent to help break down dirt and grime.
5. Apply the soft wash solution: With your soft wash system set up and the surfaces prepped, you can begin applying the soft wash solution to the surfaces to be cleaned. Make sure to apply the solution evenly and thoroughly, using the appropriate nozzle and pressure setting for the job.
6. Allow the solution to work: Once the soft wash solution is applied, you need to allow it to work for a set amount of time. This may vary depending on the type of surface being cleaned and the specific chemical mixture being used. Follow the manufacturer’s instructions and take care not to overapply or let the solution dry on the surface.
7. Rinse and clean up: After the soft wash solution has had time to work, you can rinse the surfaces thoroughly using your soft wash system. Make sure to use the appropriate nozzle and pressure setting to avoid damaging the surface. Once the job is complete, you should clean up any equipment, supplies, and debris, and leave the job site in a clean and safe condition.

Overall, setting up for a soft wash job requires careful planning, attention to detail, and a focus on safety and efficiency. With the right equipment, supplies, and techniques, you can achieve great results and build a reputation for excellence in the exterior cleaning industry.

The post Set Up / Prepping A Job appeared first on For Washers, By Washers.